-Zoey
IP20 LED commercial batten light is one of the main products of COMLED, It is slightly different from other led vapor proof light in appearance. Due to different sealing degree, the protection degree is IP20. The PC diffuser can be opened, and its biggest feature is convenient installation and maintenance. This led wraparound light fixture can only be used for surface mounting. The following is a brief introduction to its installation process.
1.Use the accessories, drill holes, and fix the mounting plate on the ceiling with nails, as shown in the following figure:
2.Connect stripped wires, connect L, N and E wires into the wiring holes correctly, Connect main power cable L, N, E to the terminal block L, N, E position.
See the following wiring diagram for details:
①Standard model
②Emergency model
3.Hanging the safety rope, put down the safety rope on the mounting plate, and connect the panel below to facilitate later installation.
4.Plug in luminaire, insert the terminal plug on the lower panel into the terminal hole on the mounting plate, and connect the mounting plate with the lower part.
5.Close the mounting plate to the panel, tighten the screws, and fix the overall LED batten fitting. Power on can be carried out after all are completed.
As a professional LED waterproof batten light and LED tube triproof fixture provider in the market, COMLED has been committed to producing LED commercial batten light that are more convenient and fit the market. If interested friends have better opinions, please contact us and we will consider carefully.
For further information or technical data, please kindly check product lines from our web(http://www.litechled.com). If you have any new ideas or customized requirements, please feel free to contact us.
We could provide different functions, such as: emergency battery backup, energy saving motion sensor, linkable cable and designs.
Welcome to visit our factory and consult with us!
Contact: Sales Engineer Zoey
Email: sales4@comledtech.com
Post time: Oct-25-2022